Insetbox 2x3 H63

In modern van racking and workshop organisation, the efficient management of small parts and consumables is the focus in order to minimise downtime and increase productivity at the job site. For craftsmen and service technicians, it is crucial that all required components such as screws, wall plugs, rivets or small tools are always within easy reach and have a clear structure. The Insetbox 2x3 H63 from Sortimo offers a specific solution here for subdividing into existing transport and storage systems. This plastic Insetbox is designed to make sensible use of the available volume in various BOXXes and cases and thus maintain an overview of the material inventory. By precise adaptation to the internal dimensions of the respective containers, the loading capacity can be optimally utilised without wasting space. The use of such organisational aids is particularly advantageous in fleet vehicles, in mobile workshop solutions such as the WorkMo or in stationary areas of craft businesses, as they enable standardised storage.

The construction of the Insetbox 2x3 is based on a robust geometry that combines stability with low self-weight. The external dimensions are 157 mm in length, 104 mm in width and 63 mm in height. These dimensions are chosen so that the box fits positively into corresponding holders. The material of the box is ABS, a plastic known for its high impact resistance, rigidity and chemical resistance. This ensures that the storage box does not easily break or deform even under harsh conditions on the construction site or during transport. The surface is in the colour Coolgrey, which not only serves a professional appearance, but is also practical, as this colour does not show dirt as strongly as light colours. The corners of the box are chamfered, which facilitates the removal of small parts and prevents sharp edges from having a negative effect on handling or the delicate small parts. The usable area of the box is 0.015 square metres, which at a weight of only 0.09 kg represents a very good ratio of volume to self-weight.

When considering the technical data, the distinction between external and internal dimensions is relevant for the planning of installations. The internal dimensions are 151 mm in length, 98 mm in width and 58.5 mm in height. This deviation from the external dimensions results from the wall thickness of the ABS plastic, which ensures the necessary stability. The height of 63 mm makes the Insetbox H63 an ideal choice for sorting medium-sized C materials. It is high enough to accommodate larger screws or small assemblies, but flat enough to be installed in shallow intermediate levels or drawers without making the overall structure unstable. The combination of these specific dimensions and the ABS material ensures that the box is durable and easy to clean.

A central feature of the Insetbox 2x3 is its compatibility with a wide range of Sortimo products. It is suitable for the metal case KM 320, the T-BOXX 120, the T-BOXX 320, the L-BOXX 102 G4, the L-BOXX 102, the L-BOXX 238, the i-BOXX 72, the LS-BOXX 306 as well as the drawer SR5. This broad fit allows users to seamlessly expand their existing systems. Whether in the L-BOXX family, in the T-BOXXes or in the i-BOXXes, the Insetbox finds its place and contributes to the systematics. It can also be integrated into the WorkMo, the mobile workshop solution from Sortimo. This versatility is a key argument for purchasing such an organisational aid, as it is not tied to a single product, but functions as a universal element in the Sortimo ecosystem.

The areas of application of this tool box 157x104 are diverse. It is ideal for storing consumables that are needed in daily use. Craftsmen use it to separate different screw sizes, nuts or seals. The clear separation in the box prevents materials from mixing, which saves time when selecting materials. In conjunction with an intermediate floor or a divider set, further combination possibilities can be created to optimise the vertical use of space. The Insetbox acts as a divider that breaks down the large volume of the BOXX into manageable, manageable units. This is particularly advantageous for fitters who often work with limited storage space on the construction site and therefore rely on compact but efficient organisation.

The advantages of using a Sortimo Insetbox lie in the improved work organisation and the resulting time savings. The essential aspects of benefit are summarised below:

The classification in the Sortimo system goes beyond the mere fit. The Insetbox is part of a thoughtful concept for vehicle and tool storage. It enables the content of the BOXXes or cases to be structured in such a way that every item has a fixed place. This supports the planning and control effort in everyday work, as the material inventory remains visible at all times. When consumables are running low, this can be recognised early and a reorder can be triggered, which prevents costly downtime due to missing small parts. The possibility of labeling the boxes individually contributes to standardisation, which is particularly advantageous in larger teams or when handing over vehicles. The Insetboxes are designed so that they can be removed or replaced at any time, which enables immediate access to small parts at the workplace.

To answer frequently asked user questions based on the technical data provided:

Which Insetbox fits in the L-BOXX 102 G4? The Insetbox 2x3 H63 is explicitly specified as suitable for the L-BOXX 102 G4. It thus finds a secure holder there and utilises the available storage space efficiently.

How many compartments does an Insetbox 2x3 have? The designation "2x3" refers to the grid or the theoretical subdivision possibility in the width and length of the box. An Insetbox 2x3 basically offers the possibility to structure the content in two rows and three columns, which creates six potential areas for sorting small parts. The actual number of compartments can be varied by the use of dividers, with the basic structure based on this 2x3 logic.

Is the Insetbox H63 suitable for T-BOXX 120? Yes, the technical data confirm that the Insetbox 2x3 H63 is suitable for the T-BOXX 120. It can thus be integrated into this model of the T-BOXX series.

What material are Sortimo Insetboxes made of? The Insetbox 2x3 H63 consists of ABS plastic. This material is known for its high strength and durability and is well suited for industrial use.

What dimensions does an Insetbox 2x3 H63 have? The external dimensions are 157 mm in length, 104 mm in width and 63 mm in height. The internal dimensions are 151 mm in length, 98 mm in width and 58.5 mm in height.

The Insetbox 2x3 H63 is thus an essential element for craftsmen who value order and efficiency. Whether as a replacement Insetbox for the SR5 drawer, as an addition for the i-BOXX 72 or to optimise the storage space in the LS-BOXX 306 – the flexibility of the system comes into play here. By targeted use of this storage box H63, companies can optimise their work processes and increase the productivity of their employees. The investment in such an organisational aid pays off through the time gained in material procurement and the reduced error rate. For all those looking for an inexpensive Insetbox for craft vehicles that still offers high quality and system compatibility, the Sortimo Insetbox represents a sensible solution. It combines functionality with design and is an indispensable component of a modern van racking.