Jumbo-Unit A 2.5-16-21 1xSBL10 1xSBL10

Professional van racking requires solutions that not only save space but also significantly improve the efficiency of daily work on construction sites or in the field service. In this context, the secure and clear storage of tools, spare parts, and heavy equipment plays a central role. One of the leading solutions on the market is the large-volume drawer, which has been specifically designed for use in commercial vehicles. It combines high stability with intelligent space utilization, enabling craftsmen and service providers to keep their work materials within easy reach without unnecessarily blocking the vehicle volume. The Sortimo Jumbo Unit represents a special standard in the category of large-volume drawers, as it is suitable for very heavy and bulky goods due to its dimensions and load-bearing capacity. For companies looking to optimize their fleet, the question of where to buy a large-volume drawer for vans is often associated with this product line, as it offers high reusability and integration into existing systems.

The structure and construction of this drawer are based on a thoughtful aluminum lightweight design. The material aluminum was chosen to achieve an optimal ratio between strength and weight. With a total weight of 44.49 kilograms, the drawer module 1650mm offers enormous stability without excessively increasing the vehicle weight. This is a crucial factor, as every kilogram in the vehicle directly influences fuel consumption and thus CO2 emissions. By avoiding heavier materials such as steel, active contribution is made to reducing energy consumption during transport. The surface of the aluminum is also treated to be resistant to corrosion, ensuring the longevity of the unit even under harsh outdoor conditions. The processing is precise, allowing the drawer to be pulled out easily and evenly without jamming or slipping unintentionally.

To accurately assess suitability for specific installation situations, the exact dimensions of the unit are of decisive importance. The external dimensions are 1,650.7 millimeters in length, 603.1 millimeters in width, and 357 millimeters in height. These dimensions define the required installation space in the vehicle. However, the user has access to an even more generous volume inside. The internal dimensions of the Jumbo Unit A 2.5-16-21 are 1,575 millimeters in length, 507 millimeters in width, and 141.6 millimeters in height. These dimensions result in an effective load space of 1.597 square meters. This large base area makes it possible to store long-chain or broad-surface items such as pipes, profiles, or large tool cases horizontally. The height of over 14 centimeters inside is sufficient to allow higher stacking of materials, as long as the load capacity limit is not exceeded.

The technical specification of this unit is defined by the so-called grid system of Sortimo. The designation A 2.5-16-21 provides information about the fit into the SR5 shelf system. The width grid of 2.5, the depth grid of 16, and the height grid of 21 determine how the unit is inserted into the vertical profiles of the shelf wall. This modularity is a core feature of the Sortimo product line. It allows the large-volume drawer to be flexibly installed in different vehicles and configurations. Since this is a variant with two drawers, the available height is used twice. A maximum payload of 100 kg is specified per drawer. This means that the entire unit can theoretically carry up to 200 kg if both compartments are loaded. This makes it the ideal choice for the truck tool drawer, as heavy mechanical components or industrial tools can be stored safely and stably without the structure of the drawer failing.

The areas of application for this solution are diverse and cover various crafts. Installers, electricians, carpenters, and automotive technicians find the perfect partner for their daily work in this large-volume drawer. Cumbersome materials that would otherwise lie in the trunk and swing around when braking find a fixed place here. The tool storage van is also optimized by this solution, as access to the tools is faster and the risk of damage to sensitive devices due to lying around in the vehicle is minimized. The drawer variant is suitable for use as a underfloor solution, where it is integrated close to the floor in the vehicle floor, as well as as a stand-alone variant that can be placed on pallets or other supports. This flexibility makes it a universal tool for any fleet.

The advantages of this specific design are obvious and support the user in their daily routine.

The classification into the Sortimo system is a crucial factor for the long-term planning of the van racking. The Sortimo Jumbo Unit is not to be viewed as an isolated product, but as part of a comprehensive concept. It can be seamlessly integrated into existing vehicle shelf systems. The combination with a cover plate or a cover tray significantly expands the possibilities of use. Thus, the surface of the drawer can be used as an additional work surface or storage area, while the compartments below continue to serve for the storage of tools. The ProSafe lashing points inside the drawer enable secure fixation of the load. This is particularly important when the drawer is accelerated or braked during the journey. The Sortimo Jumbo Unit A 2.5-16-21 1xSBL10 1xSBL10 describes the exact configuration with the respective drawer inserts. This compatibility ensures that craftsmen can rely on consistent quality and fit when expanding or retrofitting their equipment.

To clearly answer frequently asked questions about this product, a closer look at the technical details is worthwhile. Many customers ask how much weight the Sortimo Jumbo Unit can withstand. The answer is that each of the two drawer units can withstand a maximum payload of 100 kg. This is a high value that is far above the average of many conventional drawers. Another common question concerns the material. Is the large-volume drawer made of aluminum rust-proof? Although aluminum oxidizes in the air, it forms a protective layer that prevents further corrosion processes. Compared to steel, it is therefore much better protected against rust, which increases longevity in moist or salty environments. The exact internal dimensions of the Jumbo Unit A 2.5-16-21 are specified as 1,575 x 507 x 141.6 mm. These values are crucial for planning whether certain workpieces still fit into the drawer.

The question of which vehicle types this drawer variant is suitable for is easy to answer. Due to the length of over 1.6 meters and the width of approx. 60 centimeters, it is excellent for vans with large cargo space, delivery vans, and also for some truck models. However, it is not intended for small passenger cars or compact light commercial vehicles, as the space requirement is too large here. The grid 2.5-16-21 at Sortimo means that the unit is inserted into the vertical profiles of the SR5 shelf wall. The number 2.5 stands for the distance of the holes in the profiles in millimeters, while 16 and 21 determine the depth and height positioning in the grid. This ensures universal compatibility with all SR5 components.

In conclusion, the large-volume drawer is an indispensable element for modern vehicle fleets. It offers not only order but also safety and efficiency. The combination of robust aluminum, high load capacity, and modular installability makes the Sortimo Jumbo Unit an investment that pays off quickly in daily work. Anyone who values professional tool storage and wants to bring their vehicle equipment up to date will find an optimal solution in this model. The possibility of using it as part of a larger system offers additional flexibility for future expansions. For all those looking for an aluminum tool drawer for fleet that is both robust and lightweight, this unit represents a first-class choice. The installation of a large-volume drawer 1.65m length installation requires planning, but pays off more than enough through the gained clarity and time savings on the construction site.