Jumbo-Unit A 2-7-21 1xSBL10 1xSBL10

The professional vehicle outfitting requires solutions that not only save space but also withstand the daily demands of the trade and commerce. In this niche, the large-volume drawer has established itself as an indispensable element for storing tools, components, and small parts in an orderly and accessible manner. The Jumbo-Unit A 2-7-21 with the equipment 1xSBL10 and 1xSBL10 represents exactly this requirement for robust and flexible tool storage. This is a special variant of the Sortimo system, which impresses with its aluminium construction and high load capacity. For craftsmen who value efficiency and order in the van, this solution offers significant added value in daily work. The focus is on the secure storage of heavy equipment, which can often be lost or damaged on the open vehicle floor. By integrating into the SR5 shelving system from Sortimo, a seamless connection between storage and access is ensured, optimising workflows and minimising the risk of accidents from falling parts.

The construction and design of the Jumbo-Unit are based on the principle of lightweight construction using high-quality aluminium. This material ensures that the unit is extremely stable without adding excessive weight to the vehicle. The choice of aluminium is strategically smart, as it is not only corrosion-resistant but also helps to keep the total weight of the vehicle low. This has a direct impact on energy consumption and the vehicle's CO₂ footprint, which is advantageous both economically and ecologically. The drawer is designed so that it can be used both as an underfloor solution and as a stand-alone variant. This flexibility allows the tool storage to be optimally adapted to the respective conditions in the vehicle. The surface of the aluminium is treated to be resistant to wear, which significantly extends the lifespan of the unit. Despite the robust construction, handling remains intuitive and simple, as the drawer guidance relies on precise mechanisms that allow for smooth and controlled opening and closing even under full load.

To assess the suitability of the Jumbo-Unit for specific use, the technical data are of crucial importance. The external dimensions are 734.2 millimetres in length, 479.6 millimetres in width, and 357 millimetres in height. These dimensions must be taken into account when planning the vehicle conversion to ensure an optimal fit. The available storage space is defined by the internal dimensions, which are 655 millimetres in length, 388.5 millimetres in width, and 141.6 millimetres in height. These dimensions result in an effective load space of 0.509 square metres, available for storing tools and materials. The total weight of the unit is 15.71 kilograms, which is very low in relation to the load capacity and thus does not unnecessarily burden the vehicle's payload. The Jumbo-Unit is available in the variant with two drawers, allowing for additional subdivision of the storage space. The assignment to the grids of the SR5 system is done via the width grid 2, the depth grid 7, and the height grid 21. These standardised grids ensure compatibility with other modules in the Sortimo portfolio and enable modular expansion of the van racking. The maximum payload per drawer is 100 kilograms, making the Jumbo-Unit one of the most robust solutions in its class.

The areas of application for this large-volume drawer are diverse and cover a broad spectrum of craft activities. It is ideal for storing heavy tools such as rotary hammers, angle grinders, or complete tool cases, which would often lie unssecured in a conventional boot. Also, cumbersome materials that would otherwise block the way in the vehicle find a fixed place here. Since it is a customised boot drawer, it integrates excellently into the existing storage space without requiring major modifications to the vehicle floor. Typical applications can be found in electrical installation, plumbing, carpentry, or metalworking. In these areas, large quantities of tools and materials are often transported, which must be quickly accessible. The Jumbo-Unit offers not only storage space here but also structured organisation that saves time and increases productivity. As a drawer module for vehicle outfitting, it is particularly suitable for transports where the weight of the load plays a role, as the high load capacity of 100 kilograms per drawer ensures that even the heaviest loads can be transported safely.

The advantages of this specific unit are obvious and distinguish it from conventional solutions on the market.

The classification into the Sortimo system is a decisive factor for the long-term success of the vehicle outfitting. The Jumbo-Unit is not an isolated solution, but part of a thoughtful modular system. Through compatibility with other modules such as shelves, shelves, and covers, the storage space in the vehicle can be maximised. The combination with a cover plate or a cover tray significantly expands the possibilities of use. Thus, the surface of the drawer can be used as an additional work surface when the drawers are closed. The ProSafe lashing points, which are integrated into the construction, enable secure load securing, even if the drawer is open or if heavy parts are stored in it. This contributes to road safety and meets the legal requirements for load securing. The Sortimo drawer is therefore not just a container, but an active component of occupational safety and efficiency in the vehicle.

When planning an installation, concrete questions about fit and functionality often arise. A frequently asked question is how much such a unit weighs. A Sortimo large-volume drawer of the Jumbo-Unit series weighs 15.71 kilograms, which is very low in relation to the load capacity of 100 kilograms. This helps to positively influence the driving performance and consumption of the vehicle. Another important question concerns weather resistance. Is the drawer weather-resistant? Since it is made of aluminium, it is fundamentally corrosion-resistant and can be protected from weather influences in the closed vehicle. However, it is not designed as a fully sealed outdoor storage unit, but as part of the vehicle outfitting, which is usually housed in the closed vehicle interior.

The question about the internal dimensions is crucial for planning the storage of tools. The Jumbo-Unit has internal dimensions of 655 millimetres in length, 388.5 millimetres in width, and 141.6 millimetres in height. These dimensions allow the storage of standard tool cases and larger devices. Another common question is whether the drawer can be installed in every van. Can the drawer be installed in every van? Basically, the SR5 system is modular and adapts to various vehicle dimensions. However, the specific external dimensions of the Jumbo-Unit (734.2 x 479.6 x 357 mm) must fit into the respective vehicle floor. Therefore, prior measurement of the vehicle is essential to ensure that the customised boot drawer actually fits into the individual van.

Finally, the maximum payload of the drawers is a critical parameter. What is the maximum payload of the drawers? With the Jumbo-Unit A 2-7-21, the maximum payload per drawer is 100 kilograms. This high load capacity makes the unit the ideal drawer with 100 kg load capacity for the transport of heavy machinery and tools. The combination of high stability, lightweight construction, and systemic integration into the Sortimo portfolio makes the Jumbo-Unit a leading choice for professional craftsmen. It offers a sustainable solution for tool storage, characterised by its durability and functionality. For anyone looking for an aluminium tool case for van that is not only visually appealing but also offers top technical performance, the Jumbo-Unit is an excellent investment in professional vehicle equipment. It supports the craftsman in working more efficiently, safely, and organised, which ultimately has a direct impact on the profitability of the business. The decision for such a large-volume drawer for vans is therefore a decision for quality, safety, and efficiency in daily professional life.