Canister holder 10 liters without mounting material

Efficient vehicle organization is a crucial factor for the daily success of craftsmen and service providers. A well-thought-out van racking ensures not only order in the interior, but also safety while driving and quick availability of tools and materials. In the area of load securing and storage of liquids, the choice of the right accessories plays a central role. The 10-liter canister holder from Sortimo offers a specific solution here for the transport of fuel and other liquid media in vans and commercial vehicles. This component was developed to meet the requirements of professional users who value stability, reliability, and clean integration into existing system solutions. By specifically designing it for 10-liter canisters, it is ensured that frequently needed supplies are stored safely without taking up valuable storage space for other work utensils. The integration into the van racking is done in such a way that access to other areas of the vehicle is not impaired, which significantly increases work efficiency in use.

The construction of this holder is based on robust steel processing, which can withstand high mechanical loads. Compared to many plastic variants, steel offers superior rigidity and dimensional stability, which is particularly advantageous when holding heavier canisters with liquid fill. The material is chosen to withstand the dynamic forces that occur during driving. The external dimensions are 286 millimeters in length, 333 millimeters in width, and 129 millimeters in height. These compact dimensions enable space-saving installation without the holder protruding into the movement space of the driver or passengers. The own weight of 2.45 kilograms underscores the solidity of the design. A light product would often not be stable enough when holding fully loaded canisters. The high mass of the holder contributes to inertia and minimizes vibrations that could lead to noise or loosening. The surface of the steel is usually treated to be corrosion-resistant, which extends the service life of the product even under harsh conditions in workshop setups or outdoor use.

In the technical specification, the maximum payload of 12 kilograms is a key parameter. This value indicates that the holder can hold not only a light, empty container, but also safely absorb the full load of a 10-liter canister with heavy fuel. The density of diesel or petrol is approximately 0.8 to 0.85 kilograms per liter, so a full 10-liter canister weighs between 8 and 8.5 kilograms depending on the fill level. Thus, the maximum weight is well below the technical load limit of 12 kilograms. There remains a significant safety reserve, which is necessary to ensure the durability of the product over many years and to exclude plastic deformations under extreme loads. This dimensioning is typical for high-quality holders in the Sortimo range, which are not designed at the limit of load capacity, but are designed for permanent use in professional everyday life. The combination of the mentioned dimensions and load capacity makes this 10-liter canister holder a versatile solution for various vehicle types that have the appropriate mounting surfaces.

The area of application of this holder extends primarily to vehicles equipped for the transport of work materials. These include vans, panel vans, and commercial vehicles in the craft industry, gastronomy, or technical services. Craftsmen often need fuel for power tools such as lawn trimmers, hedge trimmers, or rotary hammers. A 10L canister holder offers the possibility of keeping this fuel always within reach, but safely stored in the vehicle. This avoids the annoying search for loose canisters lying in the trunk and prevents them from rolling around during braking maneuvers. Standardizing on such holders is also sensible in fleet management. If all vehicles in the fleet are equipped with identical holders, this simplifies maintenance, reordering of accessories, and training of new drivers. The clear assignment of storage spaces creates order and transparency. In addition, the holder is suitable for the transport of other liquids, provided that the chemical compatibility of the material with the content is given and the weight limit is observed.

A decisive feature is the fastening method. The 10-liter canister holder without fastening material is supplied exclusively as a holding structure. This means that the user decides independently how the installation on the vehicle wall is carried out. Usually, this holder is designed for mounting on the aluminum side wall of Sortimo van racking of system depth 4. The dimension of the aluminum side wall is 356 millimeters. This specification is important to ensure the perfect fit. The fastening is typically done via the existing profiles or mounting points of the van racking. This offers the flexibility to adapt the fastening to the individual conditions of the vehicle or the existing equipment. It also avoids the need to supply unsuitable or unnecessary material. For users looking for a 10L canister holder without fastening material, this is a clear advantage as they can use existing material.

The canister itself is secured via an integrated clamp strap. This strap serves to secure the canister against unwanted movement, tipping over, or leaking during the journey. Even if the holder fixes the canister position, dynamic forces are present during acceleration, braking, and cornering. The clamp strap grips the canister from above or the side and holds it firmly against the holder. This is a passive safety device that provides additional security if the primary holder is not sufficient or if the canister does not sit perfectly. Handling is usually simple: the strap is placed over the canister and locked. When removing it, it is released and pushed to the side. This function makes the 10-liter canister holder for vans a practical solution that makes life in the vehicle easier. Protection against leaking is particularly important to avoid damage to the van racking, other tools, or the driver's clothing. Fuels are not only flammable, but can also attack materials or cause unpleasant odors. A secure closure of the canister by the strap helps to minimize these risks.

When using canister holders for the transport of flammable liquids, legal regulations must be observed. In Germany, strict rules apply to the transport of dangerous goods, even in small quantities. It is essential to know and comply with the maximum permitted quantities for transport in the vehicle. In addition, sufficient ventilation in the load space must be ensured to prevent the accumulation of vapors. The user should inform themselves in appropriate specialist literature or with the responsible authorities about the current regulations. This responsibility lies with the operator of the vehicle. The manufacturer delivers a product that meets the technical requirements for safe absorption, but the legal classification of the transport lies with the user. These notes serve the safety and protection of all parties involved.

The advantages of this product can be summarized in several points.

The classification into the Sortimo system is an important criterion for many professionals. Sortimo is known for modular van racking that are coordinated with each other. The 10-liter canister holder without fastening material is designed for integration into systems of system depth 4. The system depth refers to the depth of the aluminum side walls, in this case 356 millimeters. This compatibility is crucial to ensure stable and safe mounting. Products that are integrated into this system often share the same mounting techniques and profile structures. This makes it possible to combine different holders, shelves, and drawers in one unit. The use of system components promotes standardization and facilitates the expansion of the van racking over time. Even if this holder is considered an independent component, it benefits from the quality and design of the overarching systems. For users looking for a Sortimo alternative, knowledge of the system depth is crucial to ensure that the new product fits into the existing equipment.

To answer frequently asked user questions, the text provides the following information. Which canister holder is suitable for 10-liter canisters? The holder described here is specifically designed for holding 10-liter canisters. Its dimensions and securing function are matched to this size. How do you attach a canister holder without drilling? The attachment is typically done on the aluminum side wall of the van racking. Since no fastening material is included, the user must choose the appropriate mounting method. Often, clamping connectors or screw connections are used on the profiles, which do not require drilling of the vehicle body, but start at the existing equipment. What is the maximum payload of a 10-liter canister holder? The technical specification states a maximum payload of 12 kilograms. This offers sufficient reserve for the full 10-liter canister, which usually weighs less. Which material is best for canister holders in vans? Steel offers high stability and dimensional stability. The holder presented here consists of steel, which gives it a robust structure that withstands the dynamic loads in the vehicle. Are there 10-liter canister holders without fastening material? Yes, this 10-liter canister holder is supplied without fastening material. The user is responsible for choosing the appropriate fastening elements, which allows adaptation to the respective equipment structure.

In conclusion, the 10-liter canister holder from Sortimo is a precise solution for the storage of fuel in vans and commercial vehicles. The combination of robust steel, the appropriate size for 10-liter canisters, and the secure fastening by the clamp strap meets the requirements of daily professional life. Taking into account the system depth 4 and the aluminum side wall of 356 millimeters ensures a perfect integration into existing van racking. The fact that no fastening material is included gives the user the freedom to design the installation individually. With a maximum payload of 12 kilograms, the product offers high safety and durability. For craftsmen and service providers, this is an important building block for an organized and safe vehicle equipment. Observing legal regulations when transporting dangerous goods always remains the top priority. Through the clear structure and proper design, this holder contributes to optimizing workflows and minimizing the risk of accidents or damage in the vehicle. The investment in such high-quality components pays off through time savings and increased safety.