Metal case KM 342 incl. 2 Insetbox sets H63

The professional organization of tools and small parts in commercial vehicles is a crucial factor for craftsmen and service providers, ensuring efficient workflows and short travel times. A central element of this organization solution is the metal case, which has been specifically designed for hard use in the workshop and on the construction site. The Sortimo KM 342 with two Insetbox sets H63 represents a robust solution for tool storage, offering both protection and maximum access speed. In contrast to conventional plastic boxes, this steel case convinces with higher stability and durability, making it an ideal choice for fleet cases that must withstand heavy loads daily. The clear separation of tools and small parts ensures that every item is in its defined place, eliminating search times and significantly increasing productivity at the workplace.

The construction of the KM 342 is based on high-quality steel, which ensures extreme resistance to mechanical stress, impacts, and environmental influences. The external dimensions of 330 x 440 x 130 mm define the outer format, while the usable interior surface is determined by the dimensions of 316 x 421 x 126 mm. These dimensions were chosen to ensure optimal utilization of the available space in the vehicle without occupying unnecessary volume. The empty weight of the case is 6.42 kg, making it manageable for transport but heavy enough to provide a stable base. The workmanship is designed so that the case retains its shape even at full capacity and ensures the integrity of the contents. The lid can be opened thanks to a special mechanism with a stop angle of 120 degrees and then holds itself in the open position, enabling comfortable one-handed operation. This is particularly advantageous when both hands are needed to remove tools while the case remains securely open.

Each set consists of a variety of differently sized boxes: twelve Insetboxes in format 1x1, six in format 1x2, three in format 2x2, and two in format 2x3, all in height H63. These standardized sizes allow for flexible adaptation to the respective small parts, from screws and dowels to electrical components and small tools. The boxes can be arranged arbitrarily and also removed individually, allowing for dynamic stocking as needed. For further subdivision of the boxes, additional dividers can be used, with four dividers IB 2x0 H63 and four dividers IB 1x0 H63 included in the lower set. These details ensure that even the smallest parts can be stored safely separated from each other, almost eliminating the risk of mixing up or losing small parts.

The technical specification of the steel case underscores its suitability for heavy-duty applications. The maximum payload is 12 kg, which means that the case is not overloaded even with a full stock of metal parts or heavy tools, and the structure is not damaged. The load space of 0.133 m² per layer offers sufficient space for a high number of items. The lid insert made of foam closes the Insetboxes at the top and prevents the contents from mixing during transit. This is an important safety aspect that prevents small parts from spreading in the vehicle, causing damage, or getting lost. The carrying handle on the front is ergonomically shaped to make lifting and carrying the case, even when fully loaded, as comfortable as possible.

The area of application for this system extends across all trades that rely on reliable organization of their tools. Whether electricians, plumbers, locksmiths, or carpenters – every professional knows how important it is to have the right parts quickly at hand. The metal case is excellent for factory preparation, where cases are transported to the customer already stocked, or for mobile work directly at the site of use. The clear structure supports the daily rhythm of work, as no time is wasted searching for lost parts. Moreover, the robust construction helps to extend the lifespan of the tools, as they are protected from damage and dirt.

The most important advantages of this product include the following points: - High stability and protection of contents due to steel construction - Flexible organization through exchangeable and combinable Insetboxes - Quick access to small parts through transparent and labelable boxes - Ergonomic carrying handle for comfortable handling even with full load - Secure fixation of the boxes through foam lid insert - Easy cleaning and care of the smooth metal surface - Ideal for pre-stocking cases for efficient customer use - Durable materials that withstand harsh environmental conditions

Integration into the Sortimo system is a decisive advantage for companies that rely on modular van racking. The KM 342 can be seamlessly integrated into Sortimo van racking and WorkMo modules. This enables continuous logistics, where cases can be transported from the workshop to the vehicle and from there to the construction site without the organization suffering. The standardization of dimensions and mounting points ensures that the case can be securely and vibration-proofly anchored in the vehicle. This is particularly important to ensure traffic safety and to prevent the case from coming loose during braking maneuvers or cornering. Compatibility with other Sortimo products opens up numerous combination possibilities to create individual solutions for different vehicle types and task profiles.

For many customers, the question arises as to what dimensions the Sortimo metal case KM 342 exactly has. The answer is: 330 millimeters in length, 440 millimeters in width, and 130 millimeters in height. These dimensions are sized to fit optimally into Sortimo shelf modules. Also relevant is the weight: the metal case incl. the two Insetbox sets weighs a total of 6.42 kg in the empty state. This is a solid weight that suggests stability but remains manageable. The question of whether the KM 342 is suitable for mounting in the vehicle is clearly answered in the affirmative. It is explicitly designed for use in commercial vehicles and can be securely fixed. The maximum payload of the steel case is 12 kg, making it suitable for heavy stocking without impairing functionality.

A frequently asked detail is the function of the Insetboxes. Insetboxes are small, modular containers that are inserted into the shelf module system to sort small parts. They function according to the principle of subdivision: you choose the appropriate size for the respective part and place it in the box. The height H63 is a standard measurement in the Sortimo system, which ensures that the boxes stand stably and can be easily removed. The tool storage for commercial vehicles benefits enormously from this structure, as it avoids chaos and creates order. Anyone looking for a robust tool carrier for their fleet will find in the Sortimo KM 342 a solution that combines quality, functionality, and system compatibility.

In summary, the metal case KM 342 with its two Insetbox sets H63 represents a thoughtful solution for professional tool storage. It combines the advantages of a stable steel case with the flexibility of modular Insetboxes. For craftsmen who value efficiency, order, and durability, this is an indispensable tool for daily use. The possibility of integrating the case into the existing Sortimo system rounds off the offer and provides a long-term perspective for the vehicle equipment. Through clear structuring and protection of the contents, not only is work facilitated, but the lifespan of the valuable tools is also increased. For all those who wish to buy the Sortimo KM 342, this offers the chance to significantly optimize their workflows and present themselves more professionally. The technical data, from the external dimensions to the weight and payload, prove the suitability for hard use in the commercial sector.