TopSystem Set ProSafe Nissan Interstar 24 3 cross members

For craftsmen and tradespeople who want to optimally prepare their van for daily use, professional van racking provides a crucial foundation. This is particularly important when using commercial vehicles such as the Nissan Interstar, where efficient use of storage space and secure transport of cargo are key. The TopSystem Set ProSafe for the Nissan Interstar 24 offers a comprehensive solution here, specifically tailored to the conditions of this vehicle type. It is a system that not only creates additional load space on the roof, but also enables continuous and secure load securing through the integration of the ProSafe system. For many users, the question of which roof rack fits the Nissan Interstar with wing doors is relevant, and this set solution from Sortimo provides a precise answer. The van racking for the Interstar is thus raised to a professional level that meets both the requirements of the Berufsgenossenschaft (statutory accident insurance) and the practical needs of the trade.

The construction of this set is based on a robust and durable architecture designed for extreme loads. At the center are three cross members with a length of 1650 millimeters. This specific length was chosen to optimally utilize the roof surface of the medium-high roof (H2) of the Nissan Interstar. The even distribution of the three cross members creates a large, continuous support surface that facilitates the transport of even bulky goods. The material of the cross members consists of a combination of aluminum and galvanized steel. Aluminum ensures a low weight, which has a positive effect on the payload of the vehicle, while the steel provides the necessary stability and strength. In addition, components made of stainless steel and plastics such as EPDM and PA6 are used for seals, fastenings, and wear-resistant parts. This selection of materials ensures high corrosion resistance and a long service life, even under adverse weather conditions on the construction site or during long transport journeys.

In addition to the robust structure, the technical design of the set is a key factor in its suitability. The set contains three cross members with a total length of 1650 millimeters, providing a broad base for load securing. The total weight of the set is 11.10 kilograms. This weight is very low in relation to the load capacity, so that the maximum payload of the vehicle is not unnecessarily burdened. The load capacity of a single cross member is up to 50 kilograms, while always observing the maximum roof load of the respective vehicle manufacturer. The fit is tuned to the specific models Nissan Interstar from model year 2024 as well as the Interstar-e 2024. Both the front-wheel drive and the rear-opening variant with wing doors were taken into account during development to ensure flawless function and accessibility.

In daily use, the great benefit of this system is particularly evident in the transport of long or bulky items. Whether ladders, pipes, panels, or large components – the TopSystem ProSafe offers a stable platform. The integrated ProSafe technology is incorporated along the entire length of the cross members. This means that lashing straps can be hooked onto any point of the cross profile without the need for additional accessories such as brackets or adapters. This significantly speeds up the loading process and increases safety, as the load can be secured at multiple points. For craftsmen who value good tool storage in their van, this is a decisive advantage, as it also allows tools to be transported on the roof protected from weather influences and simultaneously within easy reach. The rubber inserts on the cross members not only prevent the load from slipping during transit, but also protect the surface of the transported goods from scratches and damage.

The versatility of the system allows it to be seamlessly integrated into existing van racking. ProSafe is a continuous load securing system from Sortimo that can be used not only on the roof, but also at the manufacturer's original lashing points, at the Sortimo van racking in the interior, and at integrated lashing points in the vehicle floor. This uniformity simplifies work, as the same straps and fastening elements can be used throughout the vehicle. So, if you already have a Sortimo wall or standard solution in the interior, you will quickly find your way around on the roof. This promotes efficient workflows and reduces the error rate in load securing. The compatibility with various wheelbases, namely 3585 millimeters and 4215 millimeters, makes the set usable for various variants of the Interstar, as long as it is the medium-high roof H2.

The use of this set offers numerous advantages for the professional user. The following list summarizes the most important benefits:

The integration into the comprehensive Sortimo system opens up further combination options. The TopSystem is modular and can be expanded with numerous accessories. Thus, the roof can be supplemented with elements such as load stoppers, brackets for ladders, or special brackets for long pipes. These extensions make operation even more comfortable and increase safety during loading and unloading. The work steps are optimized so that the craftsman arrives at the customer's site faster and loses less time organizing the transport. The high service life of the system pays off through reduced maintenance intensity and durable materials. It is a system that serves reliably for years and adapts to the changing requirements of the trade.

To clarify the most common questions regarding suitability and installation, the following information is provided. Many users ask which roof rack fits the Nissan Interstar with wing doors. The answer is that the TopSystem Set ProSafe was specifically designed for the Nissan Interstar from model year 2024 and is precisely tailored to the medium-high roof H2 with wing doors. Another common question is how many cross members the TopSystem ProSafe Set contains. The set consists of three cross members with a length of 1650 millimeters, thus forming a broad and stable base. Regarding suitability for certain roof shapes: Is the Sortimo roof rack suitable for the Interstar H2? Yes, the set is explicitly designed for the medium-high roof H2 and ensures optimal stability and fit here. Regarding material: What material do the cross members from Sortimo use? The cross members consist of a combination of aluminum and galvanized steel, supplemented by stainless steel and technical plastics such as EPDM and PA6 for seals and fastenings. Finally, regarding fit: Does the roof rack set fit the Interstar with 3585mm wheelbase? Yes, the set is suitable for both vehicles with a wheelbase of 3585 millimeters (L2) and those with 4215 millimeters (L3), as long as the other vehicle parameters such as roof shape and model year match.

In conclusion, the TopSystem Set ProSafe for the Nissan Interstar 24 represents a high-quality solution for van racking. It combines the advantages of a stable construction with the flexibility of an integrated load securing system. For craftsmen who value efficiency, safety, and durability, this is a sensible investment in the professional equipment of the van. The combination of aluminum and steel offers the perfect balance between strength and weight. The ability to secure the load across the entire width of the roof provides additional safety on the road. By purchasing this set, users decide on a system that not only works today, but also offers long-term added value. The seamless integration into the Sortimo universe makes it easy to expand the vehicle with additional elements later without compatibility issues. This makes the van racking for the Interstar a flexible and future-proof system that meets the requirements of modern craftsmanship. Anyone who values thoughtful tool storage in their van and at the same time wants to utilize the roof as usable storage space will find a professional answer in this set. The simple handling of the ProSafe lashing points saves time and nerves, while the robust design ensures that the system performs its services even under harsh conditions on the construction site.