Tool round holder 80 Aluminium side wall

The organization of tools and equipment in the vehicle is a crucial factor for efficiency and safety in daily craftsmanship. A cluttered boot or chaotically arranged side wall not only leads to time loss when searching for the right tool, but also increases the risk of damage to sensitive devices and injuries to the driver. Sortimo tool storage has become the standard for professional van racking because it is modular, robust and adaptable. Within this system, the optimal use of available space plays a central role. In particular, the side walls of commercial vehicles often offer unused potential. This is where the 80 Aluminium Round Tool Holder comes into play, a component specifically designed to position round tools safely and within easy reach on the side wall. This holder is a typical example of thoughtful engineering tailored to the needs of installers, electricians, plumbers and heating engineers, as well as other trades. It allows frequently used round tools such as pipe wrenches, pipe grips or drill hammer handles to be stored directly at the workplace, without them remaining on the vehicle floor or disappearing into drawers.

The construction of this holder is based on a clear separation of functions. The actual holding area, which holds the tool, consists of a high-strength, glass-fibre-reinforced plastic. This PA6 material was chosen because it has high impact resistance and good chemical resistance. Tools in the trade are often subjected to heavy loads, whether through vibrations during transport or through hanging and un-hanging the devices. A pure plastic holder would fail quickly here, while pure metal would be too heavy and could corrode. The connection to the vehicle structure is made via a holder made of aluminium. This aluminium panel holder element ensures the necessary stability and fits exactly into the predefined structures of the side wall. The combination of lightweight, low-corrosion aluminium for the mounting and tough plastic for the holding ensures that the van side wall tool holder functions reliably for many years. The surface of the aluminium is designed to fit well into the visual appearance of the Sortimo van racking and is simultaneously resistant to environmental influences inside the vehicle.

When looking at the technical specifications, it becomes clear that this is a compact component that nevertheless has a great effect. The external dimensions of the round tool holder are 115 millimetres in length, 90 millimetres in width and 62 millimetres in height. These small dimensions are deliberately chosen to avoid unnecessarily blocking the available space on the side wall while still ensuring a stable mounting. The net weight of the holder is only 0.06 kilograms. This lightness helps to keep the total weight of the van racking low, which can be particularly advantageous for load securing and vehicle weight calculation. The PA6 material inside, stainless steel in the connecting or loaded areas, and the aluminium of the holder plate form a robust unit. Stainless steel is used here to prevent rust formation at critical points, which ensures the longevity of the product under rough conditions in the trade. The precise fit is a crucial factor, as the holder was specifically designed for integration into systems such as the SowaApp, enabling seamless integration into existing planning and installation processes.

The area of application for this holder is broad and covers many typical situations in the trade. Imagine you are on a construction site and regularly need a specific pipe wrench or pipe grip. Instead of leaving the vehicle, opening the boot and searching for the tool, it hangs directly in front of you on the side wall. This saves valuable time and energy. The 80mm Aluminium Side Wall Round Tool Holder Sortimo is ideal for all tools with a round cross-section that fits into the holder. Typical applications are the storage of hand tools that are used frequently but not held permanently in the hand. Tools that could be warm after use or contain moisture also benefit from the ventilation and easy accessibility. The holder ensures that these devices are not located near sensitive electronics or soft materials, but are securely fixed. In addition, the risk is minimized that tools will swing around in the vehicle during braking maneuvers and cause damage. The aluminium side wall holder solution for tool storage is therefore not only a matter of order, but also an important contribution to occupational safety.

The advantages of this specific solution can be summarized in several points that make daily work easier. The 80 Aluminium Round Tool Holder offers a clear structuring of tools and equipment.

The classification in the Sortimo system shows how important modular components are for a flexible van racking. Sortimo tool storage is designed to adapt to the individual requirements of the user. The round tool holder is such a building block that serves to make useful use of vertical surfaces. It complements other elements such as drawers, shelves and dividers by actively incorporating the wall surface into the storage areas. This makes it possible to maximize the capacity of the vehicle without overbuilding the interior. The aluminium panel holder technology ensures that the attachment is point-specific and stable, without the need for additional drilling or gluing that would permanently change the material of the side wall. This is particularly relevant for vehicles that could still be used for other purposes after the installation of the racking. The flexibility of the system allows the holders to be positioned as required and removed again during conversions. This keeps the investment in the van racking future-proof and adaptable.

To answer the frequently asked questions about this product: What are the dimensions of the Sortimo 80 Round Tool Holder? The exact external dimensions are 115 millimetres in length, 90 millimetres in width and 62 millimetres in height. These compact dimensions enable space-saving installation on the side wall. Is the tool holder made of aluminium corrosion-resistant? The aluminium of the holder plate as well as the stainless steel components are chosen so that they withstand high resistance to corrosion. This is important because tools in the vehicle are often exposed to moisture or dirt. How do you attach the round holder to the side wall? The holder is designed to clamp itself into the cutouts of the aluminium side wall. The attachment is done by inserting it into the designated slotted holes or cutouts, whereby the holder made of glass-fibre-reinforced plastic and aluminium forms a clamping connection. Which diameters fit into the 80 Round Tool Holder? The holder is specifically designed for tools with a holder diameter of approx. 80 millimetres. This covers the majority of round tools commonly used in the trade. Where can you buy replacement holders for the Sortimo system? Spare parts and further components of Sortimo tool storage are available via the official Sortimo online shop as well as authorized specialist dealers. This ensures that suitable and tested components for the van racking are always available.

In conclusion, the 80 Aluminium Round Tool Holder is an essential element for a professional and efficient van racking. It combines functionality with durability and fits seamlessly into the Sortimo system. For craftsmen who value order, safety and time savings, this holder is a sensible investment. The combination of robust material, thoughtful construction and easy handling makes it a reliable solution for tool storage in the vehicle. By clearly structuring the tools and equipment, the work process is optimized, and the vehicle remains an efficient working instrument. The Sortimo quality is evident not only in the materials, but also in the thoughtful integration into the entire structure of the van racking. Anyone who wants to improve their work processes should therefore not neglect the possibilities of side wall utilization and rely on proven solutions such as the round tool holder.