WorkMo 24-750 with 5 drawers

In the modern vehicle equipment of craftsmen and service providers, the organization of tools and small parts plays a central role in workplace efficiency. Many specialists are looking for a solution that not only saves space but also ensures quick access to the required items without unnecessarily increasing the vehicle weight. Here, a robust system takes center stage, which was specifically developed for the requirements in vans, panel vans, or trucks. The combination of high stability and modular flexibility makes this product an ideal choice for professionals who value structured tool storage in the vehicle. It is a module that serves as a permanent part of the mobile workshop and can also function as a stable workbench when positioned correctly.

The construction is based on a high-quality mixture of aluminum and plastic, which stands for an optimal balance between lightness and robustness. The outer housing and the load-bearing elements consist of aluminum, which is known for its excellent strength at low weight. This makes it possible to integrate the entire module even in vehicles with strict payload limits without significantly burdening the payload. The use of plastic components in other areas contributes to sound damping and additional decoupling of the components, which increases durability in rough daily use. The surfaces are designed to be resistant to dirt, oils, and chemical cleaners that occur daily in the trade. This choice of material is typical for the Sortimo system, which has been designed for years to withstand the demanding conditions in vehicle construction and the workshop.

The technical data shows the dimensioning of the module, which is referred to as the WorkMo 24-750 with five drawers. The external dimensions are exactly 396 millimeters in width, 526 millimeters in depth, and 744 millimeters in height. These dimensions are chosen so that the module fits into standard grid systems of vehicle manufacturers and Sortimo. The own weight is 24.70 kilograms, which is considered very low in relation to the high stability and large capacity. The maximum payload for the module is 100 kilograms, which means that heavy tools such as rotary hammers, angle grinders, or material supplies can be stored safely. In addition, the lid of the module can also be loaded with up to 100 kilograms, allowing it to serve as an additional work surface or as a stool if stability is given. The width grid is 2 and the depth grid is 4, which facilitates integration into existing system walls.

The interior is carefully designed for the storage of various tool sizes. The module contains a total of five drawers, which are divided into two height levels. One drawer is located at height 6 and has an internal dimension of 418 millimeters in width, 89 millimeters in height, and 314 millimeters in depth. This narrow but long drawer is ideal for long, flat objects such as profiles, strips, or longer screwdrivers and chisels. The four other drawers are positioned at height 8 and have an internal dimension of 418 millimeters width, 123 millimeters height, and 314 millimeters depth. These higher compartments offer sufficient space for cases, drills, battery packs, or larger toolboxes. All drawers are designed as full-extension drawers, which means they can be pulled out completely. This ensures unobstructed access to the rear area of the drawer without having to remove the contents beforehand.

In daily practice, the benefit of this system is particularly evident in the organization of small parts. The drawers can be flexibly adapted with accessories. Insetboxes, small parts inserts, or dividers can be used to divide the existing volumes into small, manageable areas. This prevents screws, dowels, or bit holders from mixing inside the drawer or sliding down when braking. Optional anti-slip mats on the drawer bottom ensure that even heavier or smooth objects retain their position. At the same time, these mats dampen the noise that occurs when metal parts hit the drawer bottom, which is perceived as pleasant in enclosed vehicle interiors. The dust-free storage also protects sensitive electronics or clean parts from contamination by dirt transferred from other tools or construction site materials.

Another important aspect is mobility and the quick conversion into a work station. By using accessories such as a roller plate or roller runners, the WorkMo module becomes a mobile tool trolley. This makes it possible to take the entire organization to the site of application. On the construction site, the module can then be positioned so that the drawers are accessible at an ergonomically favorable height. This reduces bending and stretching movements and thus spares the back of the craftsman. In the workshop, the module serves as a practical workshop trolley that can be pushed back and forth between different workstations. The combination of a fixed installation variant in the vehicle and mobile use as a trolley makes it a versatile solution for vehicle equipment.

The integration into the Sortimo system is seamless. The module is not intended as an isolated single piece, but as part of a larger overall system. It can be combined and coupled with other WorkMo modules, system walls, and brackets. This makes it possible to adapt the vehicle equipment exactly to the individual needs of the user. Whether for vehicle conversion, where only small tools are needed, or for the installer who transports many pipes and large devices, the system adapts. The standardization of the grid dimensions ensures that components from different manufacturers, which are based on the same grid systems, are often compatible, with Sortimo's own components offering high precision and quality. For fleet operators, this is particularly relevant as it allows for a uniform appearance of vehicle equipment and simplifies training for employees, as the handling is standardized.

Customers often ask which tool case is best suited for the van. The answer lies in the combination of stability, adaptability, and system compatibility. A pure case often offers little structure, while a permanently installed cabinet is not very flexible. The WorkMo module with its five drawers offers the middle way here. It is robust enough for daily use in the van, but offers the flexibility of a mobile trolley through the roller option. For those looking for an aluminum tool case that is light but still has a high load capacity, this construction is an excellent alternative to traditional steel cases. The difference between plastic and aluminum tool cases is particularly evident in weight and long-term load capacity. Aluminum is significantly lighter and corrosion-resistant, while plastic is often cheaper but can reach its limits at extreme temperatures or strong mechanical stress. The Sortimo system strategically uses the advantages of both materials to achieve the best performance.

Another important topic is the question of how much weight a tool case with drawers can withstand. For this specific model, the answer is clearly 100 kilograms of payload and 100 kilograms of lid load. These values are not just theoretical, but are supported by tests and the choice of material. This makes it possible to transport even heavy industrial tools safely without the risk of tipping over or damaging the drawer guides. For tool storage in the vehicle with 100kg payload, this is a crucial factor for safety on the road, as the weight cannot distribute uncontrollably.

Many craftsmen also wonder how to attach a tool case in the vehicle. In the case of the WorkMo module, the attachment is usually done via the grid walls of the vehicle. The modules are inserted into the designated holders and secured with the appropriate fastening elements. This prevents slipping during hard braking maneuvers or accidents. The attachment is designed so that it does not damage the structure of the vehicle wall and at the same time offers maximum stability. For the variant with rollers, the module is simply placed on the roller plate and can be fixed if necessary. This makes installing the drawer system in panel vans a simple task that can be carried out without elaborate welding work or adjustments to the vehicle structure.

Finally, the question often arises where I can buy a tool case with 5 drawers. Such specialized products are generally available via the Sortimo online shop and at authorized specialist dealers who specialize in van racking and load securing. Ordering directly through the Sortimo online shop offers the advantage that all compatible accessories and spare parts can be ordered directly, which accelerates assembly and commissioning. For the Robuster Werkzeugkoffer für Flottenbetreiber (Robust tool case for fleet operators), it is also important that the supplier offers good advice to find the right configuration for the respective vehicle class.

In summary, the WorkMo 24-750 module offers a high-quality solution for tool storage in vans and trucks. With its precise dimensions of 396x526x744mm, it fits into most application scenarios. The five drawers, which can be flexibly subdivided, ensure clarity and efficiency. Whether as a permanent part of the vehicle equipment or as a mobile station on the construction site, this system meets the high demands of craftsmen and service providers. The combination of aluminum technology, high load capacity, and modular expandability makes it an investment that pays off in time savings and better organization. For all those who want to upgrade their vehicle equipment tool case Sortimo WorkMo, this is a step towards professional work organization.