Intermediate floor metal case KM 320 and KM 330 1/1 (31 mm)

The metal case intermediate floor is an essential component for professionals who require maximum order and efficiency in the storage of small parts, tools, and consumables in vehicles and mobile workshops. In the competitive environment of the trades, every minute not spent searching for the right component counts. This is where the Sortimo system comes in, offering modular solutions that integrate seamlessly into daily work routines. This insert floor serves to optimally utilize the available volume of a metal case by creating an additional level. This transforms a simple storage container into a two-tier storage system, significantly increasing both visibility and capacity. For craftsmen who rely on reliable tools and a structured fleet outfitting, this steel intermediate floor represents a sensible extension to maintain an overview of current stock and proactively avoid shortages.

The construction of this Sortimo intermediate floor is based on robust steel, which gives it high stability and durability. The material ensures that the floor does not deform even under high loads and reliably fulfills its function as a supporting level for Insetboxes. The surface of the floor is designed to provide a secure base for the containers placed on it. Integration into the metal case is achieved by simply inserting it, with the floor covering the entire interior surface of the respective model. This design allows the case to be divided into two independent levels. Each of these levels can be stocked separately, allowing for granular organization of the contents. The case lid closes off the upper level and prevents the contents from mixing, while the lower area remains accessible if the intermediate floor is removed. The flexible handling allows the intermediate floor to be completely removed when needed to use the case as a large, undivided container, or installed to provide structure.

When examining the technical specifications, the precise dimensions stand out, which are crucial for planning the van racking. The intermediate floor for model type KM 330 has external dimensions of 420 x 315 x 31 mm. The internal dimensions are 312 x 417 x 31 mm, where a discrepancy in the presentation of the data source is recognizable, as the internal width appears larger than the external width; however, for practical application, the compatible case dimensions are relevant. The effective load space is 0.130 m², which is sufficient to arrange several Insetboxes side by side or on top of each other. The own weight of the steel intermediate floor is 0.70 kg, making it handy and easy to position without significantly affecting the load capacity of the case. The material steel guarantees that the floor can withstand the mechanical stresses of daily use. It is important to note that the precise fit is given for various models of the series. The intermediate floor fits the metal case KM 320, the KM 330, the KM 340, the KM 350 as well as the variants WM 320 and WM 330. This makes it a universally applicable accessory within this product family, underscoring the modularity of the Sortimo system.

The primary application of this tool lies in optimizing storage space in vans, delivery vans, and other service vehicles. In practice, the intermediate floor is often used to store Insetboxes of height 31 mm efficiently. This specific Insetbox height is particularly popular as it offers compact but sufficient capacity for small screws, dowels, nuts, and electrical components. On the lower level of the case, i.e., below the intermediate floor, further Insetboxes, for example of height 63 mm, can find their place depending on the model. This combination of different heights allows the vertical space of the case to be utilized without gaps. Typical application scenarios can be found in electrical installation, plumbing, or carpentry, where a high number of small parts must be managed. The craftsman can thus keep track of current consumption and reorder early, minimizing downtime on construction sites or in the workshop. The one-handed operation of the case lid in transit mode, which assumes an angle of 120 degrees, facilitates access to the stocked levels, while the ergonomic carrying handle makes transporting loaded cases comfortable.

The advantages of this system are obvious and significantly support the daily workflow. - The intermediate floor divides the case volume into two usable levels for maximum storage capacity. - Stocking with Insetboxes of height 31 mm enables clear and granular organization of small parts. - The robust steel material ensures a long service life and high stability under load. - The flexible arrangement allows the intermediate floor to be removed when needed to use the case as a whole. - Compatibility with several models such as KM 320, KM 330, KM 340, KM 350, WM 320 and WM 330 increases flexibility in the fleet. - The clear separation of the levels prevents the mixing of different items and protects the contents from damage. - The standard lid insert made of foam closes off the upper level and stabilizes the stocking. - The simple removal of individual Insetboxes enables direct access to required parts on site.

The classification into the Sortimo system shows how efficiency in mobile working environments can be increased through modular thinking. The system is designed to combine various modules and containers to create a tailor-made solution for each vehicle. The metal case with its intermediate floor is a central building block of this philosophy. It not only provides storage but also structures the workspace in the vehicle. By standardizing dimensions and shapes, the system can be flexibly expanded or adapted without requiring complex conversions. Integration into the van racking is seamless, as the cases and their components are matched to the common mounting systems of Sortimo. This makes it possible to maintain order even in harsh environments, as the cases are securely fixed and their contents remain stably positioned through the Insetboxes and the intermediate floor. The ease of work results from the fact that the craftsman no longer has to search in unclear piles, but can specifically access the desired level.

To answer frequently asked questions about technical implementation and compatibility clearly, some specific points can be derived from the present data. The dimensions of the intermediate floor for the KM 320 result from the general fit, as the floor is designed for this model and covers its interior completely. The exact external dimensions of the floor are 420 x 315 x 31 mm, which defines the spatial requirements. Regarding the material, it must be clearly stated that it is a steel intermediate floor, known for its strength, and not one made of plastic. This has an impact on the weight and load capacity in relation to stability. Regarding compatibility, not all Sortimo metal cases fit this one intermediate floor in the sense that it is universally suitable for any model of the brand, but specifically for the models KM 320, KM 330, KM 340, KM 350, WM 320 and WM 330. Cases of other types or sizes are not included in this list. A statement on the maximum load capacity or weight bearing capacity of the intermediate floor KM 31 cannot be derived from the present technical data, as no corresponding values for the load limit are specified. Therefore, no quantitative statement can be made here. The Insetbox height of 31 mm is primarily used for stocking the levels of the metal case to store small components and consumables clearly. This height is specifically matched to the vertical dimensions of the case interiors to ensure optimal use of space, often in combination with higher boxes in the lower area.

In summary, the metal case intermediate floor offers a pragmatic and effective solution for craftsmen who use their vehicle as a mobile storage and workplace. By dividing it into two levels, efficiency is increased as more contents can be accommodated in less space without losing visibility. The material steel ensures the necessary robustness for daily use in the construction industry and the trades. The compatibility with a range of Sortimo models makes the accessory a flexible investment that can be integrated into existing systems. The possibility of specifically using Insetboxes of height 31 mm supports detailed inventory management and accelerates the removal of materials. For professionals who value time savings and order, this insert floor is a sensible addition to the vehicle equipment. It helps to maximize the functionality of the case and ensures that the right tool and material are always within reach. The clear structuring by the Sortimo intermediate floor is thus an essential factor for a smooth workflow in mobile deployment.