TopSystem Set ProSafe MB Citan 2 cross members

The professional van racking in the Citan requires careful planning to optimally utilise both the storage space in the interior and the load area on the roof. With the TopSystem Set ProSafe MB Citan 2 cross members, Sortimo offers a solution specifically tailored to the conditions of small vans. This set is aimed at craftsmen and service providers who value safe, fast and efficient organisation of their work materials. The combination of high-quality material selection and the integrated ProSafe system makes this set a central component for every transport-intensive profession. It bridges the gap between simple roof rails and complex roof boxes by providing a flexible, flat platform for the transport of long or bulky goods.

The construction of the cross members is based on a robust lightweight design that ensures high load-bearing capacity with minimal weight. The Sortimo material concept relies on an intelligent mixture of different materials to combine corrosion protection, strength and protection of the load. The main structure consists of aluminium, which ensures low mass and thus does not unnecessarily burden the maximum payload of the vehicle. For stabilisation and connection to the brackets, elements made of galvanised steel are used, which provide reliable protection against rust. Stainless steel is used for the direct contact points with the load as well as for high-quality fasteners, which are additionally resistant to weather influences. EPDM seals and components made of PA6 (polyamide) are integrated for damping and protection against scratches. This combination of materials ensures that the system fulfils its function over many years without losing performance.

Regarding the technical specifications, the set offers two cross members with a length of 1250 millimetres. This dimension is crucial as it enables optimal utilisation of the roof area in the specified vehicle type. The entire set weighs 4.90 kilograms, which means minimal impact on the handling of the van. The load-bearing capacity per cross member is up to 50 kilograms. When planning the loading, however, the maximum permissible roof load of the respective vehicle manufacturer must always be observed to avoid endangering driving safety. The construction is designed to fit seamlessly into the roof profiles of the vehicles without damaging the vehicle roof itself.

The area of application of this set extends to all transport tasks where long materials such as pipes, profiles or boards must be transported safely on the roof. In contrast to rigid roof boxes, the open cross member offers the possibility of securing irregularly shaped or extremely long objects. This flexible storage is particularly advantageous for use in the construction industry, with electricians or in the sanitary sector. The ProSafe function, which is incorporated along the entire length of the cross profile, allows lashing straps to be hooked directly and without additional adapters at any point on the carrier. This offers enormous flexibility in securing different loads. Whether a single long ladder or several bundles of materials, the fastening points are always within reach.

The advantages of this system are obvious and significantly support daily work life in the craft trade.

The integration into the Sortimo system is a key factor for long-term benefit. The TopSystem is modular, which means that the roof cross member is only one component of a larger van racking system. It can be seamlessly connected to the systems in the interior. For example, tool storage in the Citan can logically follow the storage on the roof. Combination with the load limiter or other brackets is also possible to further increase safety. The ProSafe technology is not only available on the roof, but can also be found on the floor of the vehicle and at the original lashing points of the vehicle manufacturers. This creates uniform handling and standardised securing technology that every employee in the company can learn quickly and apply correctly. The Sortimo van racking sets standards for professionalism and efficiency in transport.

To clarify common questions about fit and installation, a detailed examination of compatibility is necessary. Many users ask which cross members exactly fit the Mercedes Citan H1. The answer lies in the specific adaptation of the TopSystem set to the roof profiles of the vehicle type. For the Mercedes Citan from model year 2012 with a wheelbase of 2697 mm and the H1 roof shape (low roof), this set is explicitly designed. Installation is usually carried out by installing in the existing roof rails or profile grooves of the vehicle. The support feet adapt to the curvature of the roof to ensure a firm hold. It is important to follow the installation instructions exactly to achieve optimal safety. The installation instructions for the TopSystem ProSafe in the Citan describe the steps for correct positioning and securing of the brackets.

Another common point is the question of compatibility with other vehicles. Is the TopSystem Set ProSafe also suitable for the Nissan NV250? Yes, the product description confirms suitability for the Nissan NV250 from model year 2019. Here too, it is a van with front-wheel drive and wing doors. The Sortimo cross members for the Nissan NV250 H1 are designed to utilise the specific roof profiles of this model. For the Nissan NV250, there are also special solutions such as installation boxes or tool storage systems that can be combined with the roof racks. The wing doors of the NV250 enable easy access to the interior, while the roof is used for long goods.

For the Mercedes Citan, there are also specific offers for tool storage in the interior. The Mercedes Citan tool storage can be perfectly coordinated with the roof system. This creates a holistic concept for load securing. The TopSystem cross member 1250mm for the Citan in the years 2012 to 2020 is the suitable solution for this vehicle generation. It ensures that the roof area is used to the maximum without exceeding the roof load limits. For craftsmen looking for a ProSafe cross member set for their van, this package offers a comprehensive solution. It contains everything needed for the basic equipment and can be expanded with original Sortimo accessories for the Mercedes Citan.

In summary, the TopSystem Set ProSafe MB Citan 2 cross members offers a professional response to the requirements of modern vans. It combines the advantages of lightness and stability with the innovative ProSafe load securing system. For users who want to buy the TopSystem Set ProSafe MB Citan 2 cross members, this means an investment in safety, efficiency and order. The clear compatibility with the Mercedes Citan H1 and the Nissan NV250 as well as the high-quality material processing make this product a sensible addition to every professional van racking. The possibility of seamlessly connecting the load securing to other Sortimo systems rounds off the offer and creates a real added value for daily use in the craft trade.