TopSystem Set ProSafe Peugeot Boxer 3 cross members

The professional outfitting of commercial vehicles requires thoughtful planning that combines safety, efficiency, and durability. For craftsmen and service providers who use their Peugeot Boxer daily, the optimal use of the roof represents a crucial component for simplifying daily work. The TopSystem Set ProSafe Peugeot Boxer 3 cross members offer a tailor-made solution here, specifically tailored to the conditions of this vehicle model. It is a complete roof rack system that not only creates additional storage space but also ensures high flexibility in load securing through the integration of the ProSafe system. The focus is on precise adaptation to the vehicle geometry, allowing the roof area to be used to the maximum and safely. This set is aimed at all users who value robust and durable vehicle equipment, whether in the retail sector or in fleet outfitting.

The construction of the system is based on a high-quality material mix known for its resistance and favorable weight-to-strength ratio. The roof rack consists of aluminium, which ensures lightweight construction and thus does not unnecessarily burden the payload of the vehicle. This is complemented by steel parts that are galvanised to provide corrosion protection. Stainless steel and polyamide (PA6) are used for specific components, while EPDM is used for seals and rubber inserts. This combination ensures that the system is weatherproof and fulfils its function over a long period without losing stability. The three cross members have a length of 1750 mm, enabling exact coverage of the available roof area. This dimensioning ensures that no unnecessary void spaces are created and the load capacity is optimally distributed.

In terms of technical execution, the set is designed for the Peugeot Boxer in model years from 2006 onwards, covering the latest models up to 2024. This includes both the classic diesel and petrol engines as well as the electric e-Boxer, which has been available since 2022. The system fits vehicles with wheelbases of 3000 mm and 3450 mm. It is important to distinguish here between roof shapes. The set is suitable for flat roofs as well as high roofs in variants H1 and H2. It is specifically designed for vehicles with front-wheel drive and rear wing doors. The total weight of the set is 9.77 kg, which has a minimal impact on fuel consumption or range, particularly for the e-Boxer. This significantly simplifies installation, as no separate parts need to be procured.

The area of application of this system extends to all industries that need to transport bulky, long, or heavy goods. Craftsmen who transport long components such as pipes, profiles, or boards benefit from the stable support surface. However, the transport of equipment, machines, or large boxes is also facilitated by the additional roof area. Tool storage in the van is improved by relieving the interior space, as bulky items can be moved upwards. Furthermore, the system is ideal for fleet outfitting of vans, as it offers a standardised and secure solution that can be integrated into different vehicle models in a fleet. The long service life of the Sortimo van racking makes it an economic investment characterised by low maintenance intervals.

The heart of the system is the integrated load securing system ProSafe. In contrast to conventional roof racks, where additional brackets or adhesive solutions are often required, ProSafe is incorporated along the entire length of the cross profiles. This allows the lashing straps to be wrapped simply, quickly and without further accessories at any point on the cross member. The additional attachment of EPDM rubber inserts not only prevents the load from slipping during transit but also protects it from damage due to friction or pressure points. ProSafe is a professional system from Sortimo that can be used consistently at the original lashing points of the vehicle manufacturers, at the Sortimo van racking and at integrated lashing points in the vehicle floor. By upgrading the roof rack with ProSafe, you receive a holistic load securing system for your entire vehicle, i.e. a strap system that fits everywhere.

The advantages of this specific set are obvious. They enable maximum utilisation of the roof area through the precisely matched length of the cross members. The minimal weight of the roof rack due to lightweight construction enables maximum payload, as less weight is consumed for the equipment itself. The maximum roof load of the respective vehicle must always be observed to ensure operational safety. Furthermore, the TopSystem has a long service life thanks to the corrosion-resistant materials such as galvanised steel and coated aluminium. The integrated lashing system ProSafe enables simple and quick load securing at the highest level, saving time in everyday work.

The classification in the Sortimo system shows the versatility of the van racking. The TopSystem is modular and can be expanded with numerous accessories. For example, load stoppers or special brackets for tool cassettes can be retrofitted. This makes it possible to supplement the roof rack with practical helpers that make load securing on the roof even easier. This means you are faster on the road and with your customer, as less time is lost securing the load. The combination of robust aluminium and the flexible ProSafe system makes the set an ideal solution for professional use. It is important to check the exact vehicle data when ordering to ensure a perfect fit. The images shown are often sample images, which may differ from the selected vehicle.

To answer frequently asked user questions: Which cross members fit the Peugeot Boxer? The TopSystem Set ProSafe with three cross members of length 1750 mm is specifically designed for the Peugeot Boxer from model year 2006. Is the TopSystem ProSafe Set suitable for the e-Boxer? Yes, the system is also suitable for the electric e-Boxer from model year 2022, whereby the technical conditions of the vehicle must be observed. How many cross members does the ProSafe set contain? The set consists of three cross members, which together form a wide and stable support surface. What materials are used for the Sortimo cross members? Aluminium is mainly used for lightweight construction, supplemented by galvanised steel, stainless steel, PA6 and EPDM for seals and protective coatings. Is there an assembly instruction for the Peugeot Boxer roof system?

In conclusion, the TopSystem Set ProSafe Peugeot Boxer 3 cross members represent an excellent investment for every professional user. It combines the advantages of high-quality construction with the flexibility of an integrated load securing system. Through precise adaptation to the Peugeot Boxer in various stages of development and model years, it is ensured that the system is not only visually appealing but also functionally convincing. The possibility of transporting tools and materials safely on the roof relieves the interior space and increases efficiency in everyday work. Anyone looking for a reliable solution for tool storage in the van or wanting to upgrade their Peugeot Boxer roof rail will find a professional answer with this set. The Sortimo van racking thus provides a basis for safe and efficient transport that meets the requirements of modern craft businesses.