TopSystem Set ProSafe VW T5 and T6 2 cross members

The professional outfitting of commercial vehicles requires thoughtful planning of the load space and securing systems to ensure both work efficiency and road safety. For craftsmen, service providers, and tradespeople who rely on Volkswagen Transporters, optimizing the roof represents an important pillar of fleet equipment. The TopSystem Set ProSafe VW T5 and T6 2 cross members offers a comprehensive solution tailored specifically to the conditions of the mentioned vehicle models. It combines the advantages of a robust aluminum construction with an integrated, highly efficient load securing system. This approach allows for maximum utilization of the available storage space without neglecting safety standards. The integration of ProSafe technology directly into the cross members ensures that lashing straps can be attached at any point along the profile length without additional installation effort. This eliminates the need to attach separate brackets or rubber inserts afterwards, saving time and improving clarity on the roof.

The construction of the roof rack is based on a high-quality material mix that combines durability and low weight. The main body consists of aluminum, which is known for its corrosion resistance and high strength at the same time low density. This contributes significantly to not reducing the vehicle's maximum payload by the weight of the equipment itself. To stabilize and connect to the vehicle, components made of galvanized steel and stainless steel are used. These materials offer excellent protection against rust and weather influences, which is crucial for vehicles used daily outdoors. Materials such as EPDM and PA6 (polyamide 6) are used for damping and protection against slipping and scratches. These plastic components ensure that even sensitive cargo or tool storage van racking systems are held securely without damaging the surface of the cargo or the carrier.

Regarding technical specifications, the set features two cross members, each with a length of 1450 millimeters. This dimension is chosen to optimally utilize the vehicle's roof surface while taking into account aerodynamic properties and stability. The total weight of the set is 6.73 kilograms, which is considered very low in relation to the load capacity. The load capacity per cross member is up to 50 kilograms, while always observing the respective maximum roof load specified by the vehicle manufacturer. The fit is matched to specific vehicle parameters. The set is designed for the Volkswagen T5 from model year 2003, the VW T6 from model year 2015, and the VW T6 Plus from 2015. Additionally, the ABT e-Transporter 6.1 from model year 2018 is supported. Regarding wheelbases, both 3000 mm and 3400 mm are covered. The roof shape, designated as H1 by the manufacturer and classified as a standard roof or low roof, is a prerequisite for installation. The drive type front-wheel drive and the rear opening variant, whether tailgate or barn doors, do not affect the function of the roof rack itself, but must be considered in the overall concept of the fleet equipment.

In terms of application, the strength of this system is particularly evident in the transport of bulky, long, or irregular objects. Whether roof boxes, bicycle carriers, ladders, or long components – the ProSafe technology allows for flexible positioning of the lashing points. For craftsmen, tool storage in the transporter roof system is often an important factor, as valuable equipment can be transported weatherproof and within easy reach. The combination of the robust aluminum cross member truck and the integrated securing points makes it an ideal base for various superstructures. The simple handling of the ProSafe lashing straps, which can be easily, quickly, and without further accessories hooked onto the entire surface, significantly reduces setup time on site. This benefits not only work efficiency but also increases safety, as improperly secured cargo poses a significant risk.

The advantages of this set are obvious and cover several aspects of daily practice:

The classification within the Sortimo system shows that this set is not an isolated product, but part of a modular concept. The TopSystem is designed to be combined with other components such as load stoppers, side walls, or special brackets. This creates a continuous system that not only structures the roof safely but also the interior of the vehicle. The ProSafe cross members can be seamlessly integrated into the existing Sortimo ProSafe system, which can also be used at the original lashing points of the vehicle manufacturers as well as in the vehicle floor. This enables a consistent safety level throughout the vehicle. For fleet operators, standardizing on a brand like Sortimo is advantageous because spare parts and accessories are uniform and personnel training is simplified. The compatibility with original Sortimo accessories ensures that expansions are possible later without problems, whether for expanding tool storage in the transporter roof system or optimizing load securing on the road.

To clarify common questions regarding application and fit, the following detailed consideration is offered. Which cross members fit my VW T5 or T6? The TopSystem Set ProSafe VW T5 and T6 2 cross members is exactly designed for these vehicle classes. It supports the VW T5 from 2003, the VW T6 from 2015, the T6 Plus from 2015, and the ABT e-Transporter 6.1 from 2018. It is important that the wheelbase is 3000 mm or 3400 mm and the vehicle has a standard roof (H1). How much weight can the TopSystem cross members withstand? Each of the two cross members is designed for a load of up to 50 kilograms. Here, it is mandatory to observe the maximum roof load specified by the vehicle manufacturer, which must not be exceeded. The difference between the T5 and T6 roof rail Sortimo lies in the adaptation to the respective roof profiles and mounting points of the two vehicle generations. The set is specifically designed for the mentioned models and thus ensures a precise and secure attachment. Can the ProSafe cross members also be used for barn doors? Yes, the rear opening variant, whether barn doors or tailgate, does not affect the function of the roof rack. The safety of the cargo on the roof is ensured regardless of the type of rear opening, as long as the lashing points are used correctly. What material do the Sortimo cross members use? The main construction is made of aluminum, supplemented by elements made of galvanized steel and stainless steel for the connecting parts, as well as EPDM and PA6 for damping and protection.

In summary, the TopSystem Set ProSafe VW T5 and T6 2 cross members offers a professional solution for everyone who values safety, efficiency, and durability. The combination of high-quality materials, the integrated ProSafe technology, and the exact adaptation to the vehicle parameters makes it an ideal choice for fleet equipment. It enables the safe transport of tools and materials, preserves the payload through low weight, and simplifies daily work through intuitive operation. Anyone who wants to equip their vehicle optimally will find a solid foundation in this set, which can be easily expanded with further components of the Sortimo program. The investment in this system pays off through time savings, increased safety, and a structured organization of the cargo. For the professional craftsman, it is therefore more than just a roof rail; it is an essential component of professional work.