Rear ladder PEBO 06 H2, FT

For tradespeople and service providers who regularly have to carry out work at vehicle roof level, a safe and stable access to the roof racks is an indispensable prerequisite for efficient working. The PEBO 06 H2 FT rear ladder is a component specifically developed for use in commercial vehicles, which makes access to the roof area safe and comfortable. It is primarily aimed at users who work with the Peugeot Boxer vehicle type, including its electric variant, the e-Boxer. The design is intended to simplify daily routines in the daily life of tradespeople by creating a robust connection between the floor and the roof. This solution is particularly relevant for vehicles with the H2 roof shape, i.e., high roof vehicles, where the distance between the vehicle floor and the roof rack is significant. Such a distance requires a ladder that not only fits in height but also meets the requirements of a commercial application in terms of its statics. Integration into the Sortimo programme ensures that the ladder is not regarded as an isolated individual product, but as part of a well-thought-out concept for vehicle interior equipment and safety.

The construction of the ladder is based on a material mix that combines lightness with high stability. The ladder side rails and rungs are made of aluminium, a material known for its good corrosion resistance and favourable weight-to-strength ratio. This helps to keep the ladder compact without losing strength. High-quality galvanized steel is used for the fastening elements and connection parts. The galvanic galvanizing ensures that the steel components do not rust even under adverse weather conditions and when in contact with moisture, which significantly increases the longevity of the product outdoors. In addition, components made of stainless steel and polyamide (PA6) are used, which further increases resistance to mechanical loads and chemical influences. The non-slip treads are a crucial safety feature. They provide a secure footing even in wet or dirty conditions. The ergonomically shaped side rail profile supports a natural grip and relieves the hands during climbing. Connection to the vehicle is achieved via a clamping technique that enables quick installation without drilling holes in the bodywork. At the contact surfaces with the vehicle, the sheet metal parts are equipped with rubber profiles and damping bands. These elements protect the vehicle's paintwork from scratches and pressure marks, which is advantageous when frequently installing and removing the ladder.

When considering the technical specifications, it becomes clear that the PEBO 06 H2 FT rear ladder is designed for specific vehicle variants. It is compatible with the Peugeot Boxer, model year from 2006, as well as the e-Boxer, model year from 2022, up to the latest models up to 2024. The precise fit applies to all available wheelbases, namely 3000 mm, 3450 mm and 4035 mm. This means that the ladder can be safely mounted on both short and long wheelbases, provided the H2 (high roof) roof shape is present. The rear opening must be designed as a wing door, which is standard for the models mentioned. An important aspect of the specifications is the total weight of the ladder. It weighs 7.50 kg, which represents a good compromise between stability and handling. A tradesperson can permanently install the ladder, but can also remove it when necessary without requiring one-sided physical exertion. The maximum payload is 120 kg. This value is chosen so that it covers not only the body weight of an average adult, but also the additional weight of tools, materials or personal protective equipment carried on the roof. This load-bearing capacity is crucial for safety, as it ensures that the ladder does not fail even under full use.

The typical area of application for this rear ladder lies in commercial logistics, installation technology, the solar industry and the trades in general. Wherever work is required on or on the vehicle roof, safe access is necessary. Roof racks installed by Sortimo or other manufacturers often serve to attach roof boxes, bicycle racks or to store building materials such as insulation panels, window sills or solar panels. To access these goods, the worker must enter the vehicle roof. The rear ladder for vans provides the necessary support. In contrast to simple folding ladders, which are often only designed for light private use, the vehicle rear ladder is designed for daily heavy-duty use. The combination of aluminium and galvanized steel prevents the ladder from being damaged by the constant transport of materials or by placing heavy objects on the rungs. The non-slip treads ensure that the risk of slipping down is minimized even in smooth weather or after rainfall. This is particularly important when the worker needs to have both hands free to hold on to the vehicle bodywork or the roof racks. The ergonomic design of the side rail also makes it possible to use the ladder over longer periods of time without causing rapid fatigue of the hands or arms.

The advantages of this solution are obvious and relate to both safety and efficiency in everyday work. - Installation is carried out without drilling into the bodywork, which protects the vehicle's paint surface and allows disassembly at any time without leaving residues. - Due to the clamping technique, the ladder is fastened quickly and with little tools, which saves time when preparing the vehicle. - The use of aluminium and galvanized steel ensures high stability with a low weight of 7.50 kg. - The non-slip treads and ergonomic side rail profile ensure maximum safety gain when loading and unloading. - With a maximum payload of 120 kg, the ladder is designed for use with full tool and material requirements. - The rubber profiles and damping bands at the contact surfaces prevent scratches and dents on the vehicle paint. - Compatibility with all wheelbases of the Peugeot Boxer and e-Boxer in the H2 version offers great flexibility for the vehicle fleet. - The robust construction made of high-quality material ensures a long service life even under harsh outdoor conditions.

The classification into the Sortimo system shows how sensible the combination of storage and access is. Sortimo offers solutions for organization in the interior with the Transit system and other shelf systems. The PEBO 06 H2 FT rear ladder is a complementary element that ensures access to the roof resources. Many tradespeople use the roof of their van to store bulky goods that do not fit in the interior. Without a stable ladder, access to these goods would be dangerous or even impossible. The integration of the rear ladder into the overall concept means that the tradesperson not only ensures order in the interior, but also safely accesses the exterior area. This increases productivity, as less time is spent on insecure makeshift solutions and work on the roof can begin quickly and safely. The ladder is designed in such a way that it can remain safely attached to the vehicle when not in use, without excessively affecting access to the rear doors or the aerodynamics, provided it is installed correctly. It fits seamlessly into the image of a professionally equipped commercial vehicle.

To clearly answer frequently asked questions about suitability and procurement, here is the relevant information. Which rear ladder fits the Peugeot Boxer H2? The PEBO 06 H2 FT rear ladder has been developed exactly for this vehicle combination. It fits all wheelbases (3000, 3450, 4035 mm) of the Peugeot Boxer from model year 2006 and the e-Boxer from 2022, provided the vehicle has the H2 roof shape and wing doors. How much does the Sortimo rear ladder PEBO 06 H2 weigh? The weight of the ladder is 7.50 kg. This is a good average value that combines stability with handling. Is the rear ladder suitable for the e-Boxer? Yes, the ladder is explicitly approved for the e-Boxer (model year 2022 to 2024). The electric drive variants often do not differ from the diesel models in terms of body shape, so the installation is identical. What is the maximum load of the rear ladder? The ladder is designed for a maximum payload of 120 kg. This covers the user's body weight as well as the weight of tools and materials. Where can I order a rear ladder for wing doors? Such specialized access points for commercial vehicles are available in the Sortimo online shop and from authorized specialist dealers. Searching for the PEBO 06 H2 Sortimo rear ladder leads directly to this matching product. The search term aluminium rear ladder with 120 kg payload or rear ladder for e-Boxer and Boxer 2006-2024 also helps to precisely identify the correct model. For all those looking for a Sortimo ladder for wing door rear, this product is the suitable solution to get safely and efficiently onto the roof.

In conclusion, the PEBO 06 H2 FT rear ladder is an indispensable tool for every professional user of the Peugeot Boxer and e-Boxer in the H2 version. It combines the advantages of a stable aluminium construction with the safety of a high load capacity of 120 kg. The gentle installation without drilling and the protection of the vehicle roof by damping elements make it an investment that pays off in terms of safety and comfort. In conjunction with Sortimo's storage systems, it enables holistic organization of the commercial vehicle, from the interior equipment to roof access. Tradespeople who value efficiency and safety will find a solution here that meets the daily requirements of the trades. The combination of professional technology, durable materials and precise vehicle connection makes this ladder a recommendation for anyone who wants to get the best out of their van.